GUID-D4E7A733-C112-4634-885F-617ED752142D
1. Speed range selection + button
2. Speed range selection - button
IMPORTANT: Engaging the creeper range is only allowed when the tractor is
stationary.
1. Select the speed range A.
2. Stop the tractor and press down the clutch pedal.
3. Engage the creeper range with the speed range selection - button.
NOTE: You cannot engage the creeper range with speed ranges B, C or D
selected.
The symbol flashes on the display until the creeper speed range
engages.
4. Release the clutch pedal.
5. Switch between the speed ranges LA and LB without disengaging traction
with the + and - button.
6. Disengage the creeper range.
• Select the speed range LB.
• Stop the tractor and press down the clutch pedal or move the power
shuttle lever to the N position.
• Disengage the creeper range with the speed range selection + button.
3.8.11.4 Using Powershift
You can change the Powershift gear with the shifting buttons.
NOTE: You can change the Powershift gear more than one step at a time,
directly from 1 to 3 for example, by pressing down the desired Powershift shifting
button. This triggers multiple consecutive Powershift gear changes. The number
3. Operation
- 114 -
To Next Page
Loading...
Need help?
General
