The tractors are supplied with category 3 ball hitch lower links.
WARNING: Ensure that the ball hitch lower link hooks latch correctly.
The top link has two different attaching holes on the tractor. Thus, it is possible to
get different lifting geometry for different implements. When the top link is in the
lower hole, the implement inclines forward. The upper hole gives almost
horizontal lifting movement.
3.13.1 Attaching implements
DANGER: Always use the lifting/lowering push buttons or the lifting/
lowering switch when attaching or releasing implements.
WARNING: When attaching or releasing an implement, support the
implement to prevent it from falling.
IMPORTANT: When using the hydraulic top link, ensure that it operates normally
when you are attaching an implement.
3. Operation
- 180 -
To Next Page
Loading...
Need help?
General
