3.11.3 Driver's settings display
The driver's settings display is divided into indexes section, AUTO2 HI and
AUTO2 LO settings section, speed sensor calibration section and I/O test
section.
3.11.3.1 Indexes section
You can modify the settings of the tractor's functions in the indexes section.
These settings include, for example, the tyre radius or the automatic shifting
between C and D speed ranges.
The indexes section consists of three views: menu level, index list and index
value.
GUID-A6168C96-8B04-479B-9DA6-610F653BBFC7
1. Index setting menu
2. Index list
3. Index value
3.11.3.2 Adjustable indexes
The following settings of the tractor's functions can be modified in the indexes
section:
Index
Instruction
0 Not in use
1 Setting the tyre parameter
7 Adjusting the clutch pedal engagement position
10 Setting the driving start automatics
20 Activating and deactivating the driving start
automatics
30 Adjusting the power shuttle engagement speed
50 Activating and deactivating automatic shifting
between speed ranges C and D
90 Adjusting the PTO engagement speed
260 Not in use
The settings are instructed in the chapters of each function.
3. Operation
- 163 -
To Next Page
Loading...
Need help?
General
