A085
Operation mode selection VIC 00 or 01 00
Setting Function
00 Operation mode not active
01 Operation mode active
A086
Energy saving response VC 0,0...100,0 50,0
Parameter A086 defines the voltage decrease at energy saving. If A086 = 0,0 the voltage is not
reduced but at 100,0 the voltage is very much reduced.
Function: Analog ddisplay oof tthermal uutilization C027, CC028 oor CC029 == 006
10V or 20mA correspond with the maximum thermal utilization of the motor (in accordance with the
thermal motor model: parameter b012 or b212 “Electronic overload setting”).
Function: Analog ddisplay oof LLAD-ffrequency C027, CC028 oor CC029 == 007
10V or 20mA correspond with the maximum frequency (parameter A004 or A204).
b080
AM analog adjustment VC 0...255 180
b081
FM PWM meter adjustment VC 0...255 60
With this parameter the analog output AM and the digital PWM-output FM can be adjusted. At the
FM output the changed relation of pulse and pause can lead to full-scale deflection at maximum
output value.
C086
AM analog offset VC 0,0...10,0 V Default
C087
AMI analog adjustment VC 0...255 50
C088
AMI analog offset VC 0,0...20,0 mA Default
This adjustments are done in factory and should not be changed!
To Next Page
Loading...
General