Operating & Mounting instructions – 8 074 143.03/03 – Page 66
Further displays
Is displayed during initialisation, when switching on and if a reset
signal is issued.
Is displayed in the event of low voltage or mains failure.
The waiting time for automatic restart expires.
(see parameter b001 to b003)
Is displayed during initialisation of parameters and indicates the
initialisation version:
EU ... European version
USA ... American version
Is displayed during deleting the error list.
Is displayed during copying.
No data available (e.g. display under d081...d086 if the fault
memory is empty or display under d004 if the PID controller is not
active).
The keypad is not plugged-in correctly or there is no contact.
To Next Page
Loading...
General