P1036102-007 ZXP Series 7 Card Printer Service Manual 361
8
Cleaning
Caution • PROTECT YOUR FACTORY WARRANTY!
The recommended maintenance procedures must be performed to maintain the
factory warranty. Other than the recommended cleaning procedures described in this
manual, allow only Zebra authorized technicians to service the Printer.
NEVER loosen, tighten, adjust, or bend, etc., a part or cable inside the printer.
NEVER use a high-pressure air compressor to remove particles from the printer.
Introduction
The regular use of cleaning cards will clean and maintain important parts of your
printer that cannot be reached: including the Printhead, the Transport Rollers, and the
Magnetic Encoder Station (optional feature).
To order ZXP Series 7 cleaning supplies, visit www.zebra.com/supplies.
Printer usage (total number of cards printed and total number of cards laminated) can
be found on the printer’s Properties, Device Information tab.
To Next Page
Loading...
Need help?
General
