364 ZXP Series 7 Card Printer Service Manual P1036102-007
Cleaning
Cleaning the Printer
Clean the Feeder Path
Note • Do not use previously used cleaning cards.
Step 1. From the Clean Printer Menu, select CLEAN FEEDER.
Step 2. Use the Feeder Cleaning Card, and follow the OCP instructions.
Step 3. Remove all cards from feeder cartridge, and then press Next.
Step 4. Insert short cleaning card in top slot, then press Clean.
Step 5. Press yellow button in feeder cartridge to release pusher plate, and then
press Next.
Step 6. Wait while cleaning process completes. The card will eject through same
slot.
Step 7. Flip the cleaning card, reinsert it in top slot, and then press Clean.
Step 8. Wait while cleaning process completes. The card will eject through same
slot.
Step 9. The OCP will return to the Clean Printer Menu.
Step 10. Load the cards back into the feeder cartridge.
To Next Page
Loading...
Need help?
General
