112
DRIVE OF AGRICULTURAL MACHINERY
FH13N013
RATE PRESELECTION SWITCH OF STARTING REAR PTO SHAFT
Three-position switch (1) on the right column of the cabin enables a selection of three modes of starting the rear PTO shaft clutch.
These modes differ by longer idle periods between engagement of switch of rear PTO shaft and the complete switch of the rear
PTO clutch.
3
(the upper part of the switch is fully depressed) this gear has the longest time of starting the rear PTO shaft.
Use this mode for starting light machines with low power consumption connected to rear PTO shaft such as reel raker.
2
(the switch is in the middle position) this stage has medium time of starting rear PTO shaft.
Use this mode for starting light machinery with medium power consumption connected to rear PTO shaft such as disc reaper.
1
(the lower part of switch is fully depressed) this stage has the shortest time of rear PTO shaft starting.
Use this mode for starting heavy machinery with high power consumption of the connected to the rear PTO shaft such as
feeder carriage, rotary reaper, soil or forest cutters.
To Next Page
Loading...
Need help?
General