165
BALLAST WEIGHTS
ANTIFREEZE SOLUTION FOR TYRE FILLING
Water for solu-
tion preparation
Calcium chloride
CaCl
2
Hydrated lime Solution density
at 20°C
Freezing point
approx.
Total volume
Added weight
(l) (kg) (kg)
(C)
(l) (kg)
45 11.8 0.21 1.13 -18 50 57
45 13.9 0.23 1.18 -25 50 59
45 15.4 0.25 1.21 -30 50 61
An antifreeze solution may only be used for filling tyres if you have purchases addi-
tional tubes! Caution, the tractor is equipped with tubeless tyres by the manufactur-
er!
Solution preparation:
1. Dry calcium chloride CaCl
2
is added to water, never the other way round!
2. The solution is not dangerous, but it is necessary to work carefully with it. Remove spilt drops with clean water.
3. Before filling leave the solution to cool down. Observe the prescribed quantity of hydrated lime.
4. The solution must not get in contact with metal parts and the electric installation! The solution is not harmful for the tube valve.
5. The antifreeze solution with the above mentioned composition must not be used in the cooling system!
6. After draining dispose of the antifreeze liquid as special waste!
To Next Page
Loading...
Need help?
General