209
MAINTENANCE INSTRUCTIONS
F13BN030 F13BN031
CLEANING THE HEATING FILTERS
Recover the filters positioned under the
covering grills over the windshield out-
side the cabin with regard to the degree
of clogging:
by shaking
by blowing with compressed air
Check the filters for clogging daily. Re-
place heavily clogged filters.
The safety cab of the tractor is
not equipped with special filters
of air aspirated to the cab.
It does not protect the operator
from the effect of aerosols and
other harmful substances!
Use a filter with active carbon
when working with harmful sub-
stances.
*AIR FILTER WITH ACTIVE CARBON
Filters with active carbon are installed instead of the standard dust filter and they are
replaced in the same way as the normal filters. The filter must be inserted with the
white side towards the grill. The installation instructions are found on the next page.
The filter is only used during spraying of pesticides; then it must be replaced with a
paper filter again as flying dust would clog the carbon filter in a very short time.
During its use the recirculation control must be in the position of “air suctioned from
the outside”
The fan control must be in the “maximum” position.
WARNING: The filter does not provide complete protection from toxic sub-
stances
When handling the filter wear protective gloves
Do not clean or blow the filter with compressed air.
DANGER: Replace the active carbon filter every 200 hours or 36 months (the
production date is printed on the filter). If you feel the smell of pesticides in the
cab, replace the filter immediately and have the cab sealing checked. Used fil-
ters must be disposed of in specialized collection centres.
To Next Page
Loading...
Need help?
General