156
WHEEL TRACK CHANGE
E505
FRONT DRIVE AXLE FENDERS
Front drive axle fenders can come in two designs
A - Fenders with solid consoles where the axis of fenders turn corresponds with the
axis of front wheel turn. Fenders are on adjustable holders that can be set
according to required tracks and the type of tyres used on the side (by relocating
screws (a) to different openings) and also in terms of height (by relocating screws
(b) to different openings).
B - Fenders with turnable consoles where the axis of turning corresponds to the axis
of front wheel only partially. This design enables the setting of greater front
wheels lock. Fenders are on adjustable holders which can be set according to the
kind of tyres used in terms of height (by relocating screws (b) to different
openings).
To Next Page
Loading...
Need help?
General