84
DRIVING OPERATION
FH12N031 FH12N032
DRIVE WITH FRONT DRIVE AXLE ON
Use the front drive axle with slip-
page of rear wheels to enhance
the draft of a tractor.
On the roads and hard surface,
drive with front drive axle is not
recommended (drive with en-
gaged front drive axle causes in-
creased wear of front tyres).
Permanent engagement of front drive ax-
le is permissible, if front mounted agricul-
tural machinery or tool is connected to
the tractor. This condition is listed in
manual of applicable machine.
Maximum permitted speed of these sets
is 15 km per hour.
REAR DIFFERENTIAL LOCK BUTTON
Engagement of rear differential lock but-
ton is done by pressing a button, which
returns to its original position after re-
lease.
The engagement of differential lock but-
ton is signalized by a lit symbol on the
button and a symbol on the display.
Disengagement of rear differential lock is
done by a repeated depression of a but-
ton
When depressing brake pedals or when
reaching travel speed higher than
15 km/h, the differential lock automatical-
ly switches off.
To Next Page
Loading...
Need help?
General