ABB MicroFlex e190 User Manual

Technical data 161
 Functional safety standards
RCM marking
RCM marking is required in Australia and New Zealand. A RCM mark is
attached to each drive in order to verify com
pliance with the relevant
standard (IEC 61800-3, Adjustable speed electrical power drive systems -
Part 3: EMC product standard including specific test methods).
CE marking
A CE mark is attached to the drive to verify that the unit follows the provisions of the
European, EMC, and machinery directives.
CE Declaration of Conformity
The declaration (3AXD10000540159) is available on the internet. See Document
library on the Internet on page 209.
Compliance with the European EMC Directive
The cabinet builder is in responsible for the compliance of the drive system with the
European EMC Directive. For information on items to consider, see:
• Subsections Compliance with EN 61800-3, category C2 & C3 and Compliance
with EN 61800-3, category C4, below.
• The chapter Planning the electrical installation in this manual.
• Technical Guide No. 3 – EMC Compliant Installation and Configuration for a
Po
wer Drive System (3AFE61348280 [English]).
Definitions
EMC stands for Electromagnetic Compatib
ility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment.
Likewise, the equipment must not disturb or interfere with any other product or
system within its locality.
EN 61508:2010,
Parts 1, 2
Functional safety of electrical/electronic/programmable electronic
safety-related systems
EN 61800-5-2:2007
IEC 61800-5-2:2016
Adjustable speed electrical power drive systems: Safety requirements,
Functional
EN ISO 13849-1:2015 Safety of machinery: Safety-related parts of control systems. Part 1:
General Principles for Design
EN ISO 13849-2:2012 Safety of Machinery: Safety-related parts of control systems. Part 2:
Validation
EN 62061:2005 +
A1: 2013 + A2: 2015
Safety of machinery: Functional safety of safety-related electrical,
electronic and programmable electronic control systems

ABB MicroFlex e190 Specifications

General

Brand	ABB
Model	MicroFlex e190
Category	Servo Drives
Language	English