ABB MicroFlex e190 User Manual

Mains filters 165
13
Mains filters
What this chapter contains
This chapter describes how to select and install mains filters for the MicroFlex e190.
The chapter also contains the relevant technical data.
When is a mains filter required?
The EMC product standard (EN 61800-3) covers the specific EMC requirements
stated for drives (tested with motor and cable) within the EU. EMC standards such as
EN 55011 or EN 61000-6-3/4 apply to industrial and household equipment and
systems
including drive components inside. Drive units complying with the
requirements of EN 61800-3 are always compliant with comparable categories in
EN 55011 and EN 61000-6-3/4, but not necessarily vice versa. EN 55011 and
EN 61000-6-3/4 do neither specify cable length
nor require a motor to be connected
as a load. The emission limits are comparable according to the following table.
EN 61800-3, product
standard
EN 61800-3,
product standard
EN 55011, product family
standard for industrial,
scientific and medical (ISM)
equipment
1st environment,
u
nrestricted distribution
Category C1 Group 1 Class B
1st environment,
res
tricted distribution
Category C2 Group 1 Class A
2nd environment,
u
nrestricted distribution
Category C3 Group 2 Class A
2nd environment,
res
tricted distribution
Category C4 Not applicable
EMC standards in general

ABB MicroFlex e190 Specifications

General

Brand	ABB
Model	MicroFlex e190
Category	Servo Drives
Language	English