STT04 DOWNLINK SOFTWARE
SECURITY
O - 3
9. To set user name and password to be case sensitive, click Make
User Name and Password Case Sensitive.
NOTE: Case sensitivity provides added security, however it can
become a nuisance to the entry process. In addition to remembering
the user name and password, the user must also remember whether
they are all lower case, all upper case, initial capitals, or some other
variation. It is recommended that this box be left unchecked to avoid
unnecessary confusion.
10. Click OK.
11. Remove the Password Key disk and store in a safe and secure
location with limited access. Only Supervisor security level personnel
should have access to the Password Key disk.
Deleting a User
Use this function to delete a user name.
1. Start the Password program. Refer to Starting the Password
Program.
2. Insert the Password Key disk into the appropriate floppy disk
drive.
3. Click Key and type the appropriate floppy disk drive letter (i.e., A:)
and click Verify. The screen shown in Figure O-1 appears.
4. Click Password and select Delete. A list of user names appears.
5. Select the user name to remove and click Delete.
Table O-1. User Level Accessibility
Menu Item Operation
Access Level
Supervisor Engineer Technician
Database New X X
Open XXX
Exit XXX
View Configurations Connected STT04 X X X
Database files X X X
Transfer Configurations Upload from STT04 X X
Download to STT04 X X
Utilities Test Communication X X X
Change STT04 Name X X
Special Advanced Report diagnostics X X X
Upgrade firmware X
Upgrade boot code X
Set COM Port XXX
To Next Page
Loading...
Need help?
General
