STT04 DOWNLINK SOFTWARE
SECURITY
O - 4
6. Remove the Password Key disk and store in a safe and secure
location with limited access. Only Supervisor security level personnel
should have access to the Password Key disk.
Bypass
Use this function to bypass the security feature. When Bypass is
selected no password is required to access any or all of the function-
ality of DownLink software including overwriting, editing and deleting
configurations.
Disable Password Security
1. Start the Password program. Refer to Starting the Password
Program.
2. Insert the Password Key disk into the appropriate floppy disk
drive.
3. Click Key and type the appropriate floppy disk drive letter (i.e., A:)
and click Verify. The screen shown in Figure O-1 appears.
4. Click Password and select Bypass. A message appears warning
of the significance of bypassing security.
5. Click Yes to bypass security.
Enable Password Security
1. Start the Password program. Refer to Starting the Password
Program.
2. Insert the Password Key disk into the appropriate floppy disk
drive.
3. Click Key and type the appropriate floppy disk drive letter (i.e.,
A:) and click Verify. The screen shown in Figure O-1 appears.
4. Click Password and select Delete.
5. Select PASSWORD BYPASS and click Delete.
6. Remove the Password Key disk and store in a safe and secure
location with limited access. Only Supervisor security level personnel
should have access to the Password Key disk.
View User Names
Use this function to view a list of user names.
1. Start the Password program. Refer to Starting the Password
Program.
To Next Page
Loading...
Need help?
General
