SMART POSITIONER
SPECIAL FEATURE KEY FUNCTIONS
A - 12
Reset Totals
The positioner has a travel counter that counts each movement of the
positioner. The travel counter increments one for every movement
that amounts to five percent of span. The total number of movements
is used to help determine when maintenance is performed on final
control elements. The reset totals function sets the travel counter to
zero.
Key Display Comments
Select RESET TOTALS.
The travel counter is set to zero. To check the travel
counter, refer to Status Check in Section 4.
SPECIAL
FEATURE
FIX SET POINT
CANCEL FIX SET
PID PARAMETERS
STANDARD CONFIG
→ RESET TOTALS
ENTER
ID TAGNAME
READY
To Next Page
Loading...
Need help?
General
