xiv Rockwell Automation Publication 1766-UM001I-EN-P - June 2015
Preface
Related Documentation
The following documents contain additional information concerning Rockwell
Automation products. To obtain a copy, contact your local
Rockwell Automation office or distributor.
Common Techniques Used
in this Manual
The following conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural steps.
• Numbered lists provide sequential steps or hierarchical information.
• Italic type is used for emphasis.
Resource Description
MicroLogix 1400 Programmable Controllers Instruction Set
Reference Manual 1766-RM001
Information on the MicroLogix 1400 Controllers instruction set.
MicroLogix 1400 Programmable Controllers Installation
Instructions 1766 -IN001
Information on mounting and wiring the MicroLogix 1400 Controllers, including a
mounting template for easy installation.
Advanced Interface Converter (AIC+) User Manual
1761-UM004
A description on how to install and connect an AIC+. This manual also contains
information on network wiring.
DeviceNet Interface User Manual 1761-UM005
Information on how to install, configure, and commission a DNI.
DF1 Protocol and Command Set Reference Manual 1770-6.5.16
Information on DF1 open protocol.
Modbus Protocol Specifications Available from
www.modbus.org
Information about the Modbus protocol.
Distributed Network Protocol(DNP3) Specifications Available
from www.dnp.org
Information about the Distributed Network Protocol.
Allen-Bradley Programmable Controller Grounding and Wiring
Guidelines 1770-4.1
In-depth information on grounding and wiring Allen-Bradley programmable controllers.
Application Considerations for Solid-State Controls SGI-1.1
A description of important differences between solid-state programmable controller
products and hard-wired electromechanical devices.
National Electrical Code - Published by the National Fire
Protection Association of Boston, MA.
An article on wire sizes and types for grounding electrical equipment.
Allen-Bradley Publication Index SD499 A complete listing of current documentation, including ordering instructions. Also
indicates whether the documents are available on CD-ROM or in multi-languages.
Allen-Bradley Industrial Automation Glossary AG-7.1
A glossary of industrial automation terms and abbreviations.