Operation menu
(OPTIONS, 2, )
OPERATION
Operation :EP
Temp. Operation :Demo
^V, <>, E, X
Alarms: 0 Faults: 0 Cond.: 0 P: 1 SDZ
Return to Options Menu Page 165
Select the temporary operation
Confirm entry
The operating options of the FP2000 is set by means of the dip switch situated on the
host power supply (*See Appendix A of the FP2000 Installation and Commissioning
Manual).
The switch is read at restart, and cannot be changed during operation.
A temporary operation "DEMO" can be set. The DEMO mode has the following effect:
1 Buzzer is disabled.
2 Tamper switch is ignored.
3 Memory Unlock switch is ignored.
The "DEMO" mode will operate for 72 hours if not cancelled by the operator. A restart
also clears the "DEMO" mode.
To Next Page
Loading...
Need help?
General
