Aritech FP2000 Series Reference Guide

Device protocol
(OPTIONS, 3, )
DEVICE PROTOCOL
Protocol :Aritech 900
Loop :1
LEDs/Loop :126
X
Alarms: 0 Faults: 0 Cond.: 0 P: 1 SDZ
Return to Options Menu Page 165
The device protocol used by the FP2000 can be viewed. The protocol is set by the dip
switch situated on the host power supply. (*See Appendix A of the FP2000 Installation
and Commissioning Manual)
The Aritech 2000 protocol has a second line indicating a working mode; please refer to
the appropriate Detector Installation Manual. The working mode can be on/off/blinking,
relating to the 7-segment display on some Aritech Series 2000 detector models.
The Aritech 900 protocol has extra provisions for intrinsically safe devices.
LED's/Loop limits the amount of LED's that can be simultaneously switched ON on a
particular loop.

Aritech FP2000 Series Specifications

General

Brand	Aritech
Model	FP2000 Series
Category	Fire Alarms
Language	English