Field access
(ACCESS MENU, 2, )
FIELD ACCESS
Field number :0
Access Level :1
0. . 9, ^V, <>, E, X
Alarms: 0 Faults: 1 Cond.: 0 P: 1 SDZ
Return to Access Menu Page 59
Select item to be changed
0..9 change data in item (Unlock memory!)
Confirm entry
*See also Page 60
Each menu can be assigned an access level: 1-Low level; 2-High level. Entry codes that
have an access level of 1 cannot use any menu that has an access level of 2. Menus that
are set to access level 1 can be used by all entry codes.
The default of all menus is 1 except for this menu (Field Access), Set Times and
Allocation. Thus, as default, an access code of level 2 is required to change the level of
any menu. (The access levels of the mentioned menus can be changed to 1).
A field number defines each menu of the FP2000. (*Refer to Appendix A for the field
number of each menu. )
The access level is set by first entering the field access number of the menu, and then
changing the access level number.
To Next Page
Loading...
Need help?
General
