User's Manual 134 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
Note: The parameter is mandatory.
Tagging
tagging
[DeviceTable_Tagging]
Defines VLAN tagging for the Ethernet Device.
 [0] Untagged = (Default for pre-configured Ethernet Device)
The Ethernet Device accepts untagged packets and packets
with the same VLAN ID as the Ethernet Device. Incoming
untagged packets are assigned the VLAN ID of the Ethernet
Device. The Ethernet Device sends these VLAN packets
untagged (i.e., removes the VLAN ID).
 [1] Tagged = (Default for new Ethernet Devices) The Ethernet
Device accepts packets that have the same VLAN ID as the
Ethernet Device and sends packets with this VLAN ID. For all
Ethernet Devices that are associated with the same Ethernet
Group (see 'Underlying Interface' parameter above) and
configured to Tagged, incoming untagged packets received
on this Ethernet Group are discarded.
Note: Only one Ethernet Device can be configured as Untagged
per associated Ethernet Group. In other words, if multiple
Ethernet Devices are associated with the same Ethernet Group,
only one of these Ethernet Devices can be configured to
Untagged; all the others must be configured to Tagged.
To Next Page
Loading...
Need help?
General
