Version 7.2 969 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Parameter Description
However, this "quiet" period must be at least twice the Threshold Window
value. For example, if IDSAlarmClearPeriod is set to 20 sec and the
Threshold Window is set to 15 sec, the IDSAlarmClearPeriod parameter
is ignored and the alarm is cleared only after 30 seconds (2 x 15 sec).
The valid value is 0 to 86400. The default is 300.
IDS Policy Table
IDS Policy Table
[IDSPolicy]
Defines IDS Policies.
The format of the ini file parameter is:
[ IDSPolicy ]
FORMAT IDSPolicy_Index = IDSPolicy_Name, IDSPolicy_Description;
[ \IDSPolicy ]
For a detailed description of the table, see ''Configuring IDS Policies'' on
page 169.
IDS Rule Table
IDS Rule Table
[IDSRule]
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For a detailed description of the table, see ''Configuring IDS Policies'' on
page 169.
IDS Match Table
IDS Match Table
[IDSMatch]
Defines target rules per IDS Policy.
The format of the ini file parameter is:
[ IDSMatch ]
FORMAT IDSMatch_Index = IDSMatch_SIPInterface,
IDSMatch_ProxySet, IDSMatch_Subnet, IDSMatch_Policy;
[ \IDSMatch ]
For a detailed description of the table, see ''Assigning IDS Policies'' on
page 173.
62.4.7 OCSP Parameters
The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Table 62-28: OCSP Parameters
Parameter Description
Enable OCSP Server
configure network > ocsp >
enable
Enables or disables certificate checking using OCSP.
 [0] Disable (default)
 [1] Enable
To Next Page
Loading...
Need help?
General
