User's Manual 972 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
Note: For the parameter to take effect, a device reset is required.
Quality of Service Rules Table
Quality of Service Rules
configure voip > qoe
quality-of-service-rules
[QualityOfServiceRules]
Defines Quality of Service rules.
The format of the ini file table parameter is as follows:
[ QualityOfServiceRules ]
FORMAT QualityOfServiceRules_Index =
QualityOfServiceRules_IPGroupName,
QualityOfServiceRules_RuleMetric, QualityOfServiceRules_Severity,
QualityOfServiceRules_RuleAction,
QualityOfServiceRules_CallsRejectDuration,
QualityOfServiceRules_AltIPProfileName;
[ \QualityOfServiceRules ]
For a detailed description of the table, see ''Configuring Quality of
Service Rules'' on page 306
Performance Profile Table
Performance Profile
configure system >
performance-profile
[PerformanceProfile]
Defines alarm thresholds per metric (ASR, ACD and NER).
The format of the ini file table parameter is as follows:
[ PerformanceProfile ]
FORMAT PerformanceProfile_Index = PerformanceProfile_Entity,
PerformanceProfile_IPGroupName, PerformanceProfile_SRDName,
PerformanceProfile_PMType, PerformanceProfile_MinorThreshold,
PerformanceProfile_MajorThreshold, PerformanceProfile_Hysteresis,
PerformanceProfile_MinimumSample, PerformanceProfile_WindowSize;
[ \PerformanceProfile ]
For a detailed description of the table, see ''Configuring Performance
Profiles'' on page 815.
62.6 Control Network Parameters
62.6.1 IP Group, Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 62-30: Proxy, Registration and Authentication SIP Parameters
Parameter Description
IP Groups Table