AudioCodes MediaPack MP-11 Series User Manual

User's Manual 936 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
parameters and view error/notification messages. To establish serial
communication with the device, see ''Establishing a CLI Session'' on
page
83.
Note: For the parameter to take effect, a device reset is required.
[SerialBaudRate]
Defines the serial communication baud rate.
The valid values include the following: 1200, 2400, 9600, 14400, 19200,
38400, 57600, or 115200 (default).
Note: For the parameter to take effect, a device reset is required.
[SerialData]
Defines the serial communication data bit.
 [7] = 7-bit
 [8] = (Default) 8-bit
Note: For the parameter to take effect, a device reset is required.
[SerialParity]
Defines the serial communication polarity.
 [0] = (Default) None
 [1] = Odd
 [2] = Even
Note: For the parameter to take effect, a device reset is required.
[SerialStop]
Defines the serial communication stop bit.
 [1] = (Default) 1-bit (default)
 [2] = 2-bit
Note: For the parameter to take effect, a device reset is required.
[SerialFlowControl]
Defines the serial communication flow control.
 [0] = (Default) None
 [1] = Hardware
Note: For the parameter to take effect, a device reset is required.
62.1.7 Auxiliary and Configuration File Name Parameters
The table below lists the ini file parameters associated with the Auxiliary files. For more
information on Auxiliary files, see ''Loading Auxiliary Files'' on page 737.
Table 62-7: Auxiliary and Configuration File Parameters
Parameter Description
General Parameters
[SetDefaultOnIniFileProcess] Determines if all the device's parameters are set to their defaults
before processing the updated ini file.
 [0] = Disable - parameters not included in the downloaded ini file
are not returned to default settings (i.e., retain their current
settings).
 [1] = Enable (default).
Note: The parameter is applicable only for automatic HTTP update or
Web ini file upload (not applicable if the ini file is loaded using BootP).
[SaveConfiguration] Determines if the device's configuration (parameters and files) is
saved to flash (non-volatile memory).

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English