Version 7.2 637 Mediant 1000B Gateway & E-SBC
User's Manual 29. Enabling the SBC Application
29 Enabling the SBC Application
Before you can start configuring the SBC, you must first enable the SBC application. Once
enabled, the Web interface displays the menus and parameter fields relevant to the SBC
application.
Note: The SBC feature is available only if the device is installed with a License Key
that includes this feature. For installing a License Key, see ''License Key'' on page
763.
 To enable the SBC application:
1. Open the Applications Enabling page (Setup menu > Signaling & Media tab > Core
Entities folder > Applications Enabling).
2. From the 'SBC Application' drop-down list, select Enable:
3. Click Apply, and then reset the device with a save-to-flash for your settings to take
effect.
To Next Page
Loading...
Need help?
General
