User's Manual 322 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
registers the user in its registration database.
Note:
 Regardless of the parameter, the device always accepts registration
refreshes from users that are already registered in its database.
 For a SIP Interface that is associated with the SRD, if the
corresponding parameter in the SIP Interfaces table
(SIPInterface_EnableUnAuthenticatedRegistrations) is configured to
Disable or Enable, the parameter in the SRD is ignored for calls
belonging to the SIP Interface.
 The parameter is applicable only to the SBC application.
17.2.1 Filtering Tables in Web Interface by SRD
When your configuration includes multiple SRDs, you can filter tables in the Web interface
by SRD. The filter is configured in the SRD Filter drop-down list, located on the Web
interface's toolbar, as shown below.
Figure 17-8: Filtering Display by SRD
The filter is applied throughout the Web GUI. When you select an SRD for filtering, the
Web interface displays only table rows associated with the filtered SRD. When you add a
new row to a table, the filtered SRD is automatically selected as the associated SRD. For
example, if you filter the Web display by SRD "Comp-A" and you then add a new Proxy
Set, the Proxy Set is automatically associated with this SRD (i.e., the 'SRD' parameter is
set to "Comp-A"). All other parameters in the dialog box are also automatically set to values
associated with the filtered SRD.
The SRD filter also affects display of number of configured rows and invalid rows by status
icons on table items in the Navigation tree. The status icons only display information
relating to the filtered SRD.
SRD filtering is especially useful in multi-tenant setups where multiple SRDs may be
configured. In such a setup, SRD filtering eliminates configuration clutter by "hiding" SRDs
that are irrelevant to the current configuration and facilitates configuration by automatically
associating the filtered SRD, and other configuration elements associated with the filtered
SRD, wherever applicable.
To Next Page
Loading...
Need help?
General
