Version 7.2 571 Mediant 1000B Gateway & E-SBC
User's Manual 26. Configuring Supplementary Services
2. Click New; the following dialog box appears:
Figure 26-16: Charge Codes Table - Add Dialog Box
3. Configure a Charge Code according to the parameters described in the table below.
4. Click Apply.
Table 26-7: Charge Codes Table Parameter Descriptions
Parameter Description
Index
[ChargeCode_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
End Time (1 - 4)
end-time-<1-4>
[ChargeCode_EndTime<1-4>]
Defines the end of the time period in a 24 hour format, hh. For
example, "04" denotes 4 A.M.
Note:
 The first time period always starts at midnight (00).
 It is mandatory that the last time period of each rule end at
midnight (00). This prevents undefined time frames in a day.
Pulse Interval (1 - 4)
pulse-interval-<1-4>
[ChargeCode_PulseInterval<1-4>]
Defines the time interval between pulses (in tenths of a second).
Once the call is established, the device generates a pulse for
each pulse interval.
Pulses On Answer (1 - 4)
pulses-on-answer-<1-4>
[ChargeCode_PulsesOnAnswer<1-
4>]
Defines the number of pulses that the device generates upon
call answer.
To Next Page
Loading...
Need help?
General
