AudioCodes MediaPack MP-11 Series User Manual

User's Manual 688 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
fix2Add]
Destination URI, you can configure the parameter to a string of up
49 characters. If you set the 'Manipulated Item' parameter to Calling
Name, you can configure the parameter to a string of up 36
characters.
Privacy Restriction Mode
privacy-restriction-mode
[IPOutboundManipulation_Priv
acyRestrictionMode]
Defines user privacy handling (i.e., restricting source user identity in
outgoing SIP dialogs).
 [0] Transparent = (Default) No intervention in SIP privacy.
 [1] Don't change privacy = The user identity in the outgoing SIP
dialog remains the same as in the incoming SIP dialog. If a
restricted number exists, the restricted presentation is normalized
as follows:

From URL header: "anonymous@anonymous.invalid"

If a P-Asserted-Identity header exists (either in the incoming
SIP dialog or added by the device), a Privacy header is
added with the value "id".
 [2] Restrict = The user identity is restricted. The restriction
presentation is as follows:

From URL header: "anonymous@anonymous.invalid"

If a P-Asserted-Identity header exists (either in the incoming
SIP dialog or added by the device), a Privacy header is
added with the value "id".
 [3] Remove Restriction = The device attempts to reveal the user
identity by setting user values in the From header and removing
the privacy "id" value if the Privacy header exists. If the From
header user is anonymous, the value is taken from the P-
Preferred-Identity, P-Asserted-Identity, or Remote-Party-ID
header (if exists).
Note:
 Restriction is done only after user number manipulation (if any).
 The device identifies an incoming user as restricted if one of the
following exists:

From header user is "anonymous".

P-Asserted-Identity and Privacy headers contain the value
"id".

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English