Version 7.2 695 Mediant 1000B Gateway & E-SBC
User's Manual 35. Configuring Dial Plans
2. From the 'Action' drop-down menu, choose Import; the following dialog box
appears:
Figure 35-5: Importing Dial Plan Rules for Specific Dial Plan
3. Use the Browse button to select the Dial Plan file on your PC, and then click OK.
CLI (from a remote server):
(config-voip)# sbc dial-plan-rule import-csv-from all <URL of
server>
Note:
• The file import feature only imports rules of Dial Plans that already exist in the Dial
Plan table. If a Dial Plan in the file does not exist in the table, the specific Dial Plan
is not imported.
• Make sure that the names of the Dial Plans in the imported file are identical to the
existing Dial Plan names in the Dial Plan table; otherwise, Dial Plans in the file
with different names are not imported.
• When importing a file, the rules in the imported file replace all existing rules of the
corresponding Dial Plan. For existing Dial Plans in the Dial Plan table that are not
listed in the imported file, the device deletes all their rules. For example, if the
imported file contains only the Dial Plan "MyDialPlan1" and the device is currently
configured with "MyDialPlan1" and "MyDialPlan2", the rules of "MyDialPlan1" in
the imported file replace the rules of "MyDialPlan1" on the device, and the rules of
"MyDialPlan2" on the device are deleted (the Dial Plan name itself remains).
To import dial plan rules for a specific Dial Plan:
Web interface (from a local folder):
1. Open the Dial Plan table.
2. Select the required Dial Plan, and then click the Dial Plan Rule link; the Dial Plan
Rule table opens, displaying all the rules of the selected Dial Plan.
To Next Page
Loading...
Need help?
General
