Barco PHWU-81B User Manual

13. Specifications
13.7 Specification of RGB signals in each computer mode of the projector
Important
• Some computers aren’t compatible with the projector.
• The projector ’s maximum resolution is 1920 x 1200 pix els (PHWU-81 B), 128 0 x 800 pixels (PHWX- 81B), or 1024 x 768 pix els
(PHXG-91B). It may not display images of higher resolutions than its maximum resolution correctly.
• Images with SYNC on G (Green) signal may jitter.
• Images with S YN C on G (Green) signal may be tinged with green
• If the resolution and frequency of your computer aren’t shown on the table, find the compatible resolution and frequency by
changing t he resolution of your c ompu ter.
• TV60 and TV5 0 are equivalent to 480i and 576i respectively. When these signals are su pplied to the VIDEO IN or S-VIDEO IN
terminal, the signal mo de is indica ted as TV60 or TV50. When they are supplied to the COMPUTER/CO MPO NENT VIDEO IN
terminals, the signal mode is indicated as 480i or 576i.
• This projector doesn’t support 480p signals from v ideo devices hav ing 4 lines (R, G , B, CS*) or h aving 5 lines (R, G, B , H, V).‚-
NATIVE mode (for PHWU-81B/PHWX-81B only)
When m oire patterns or lines of uneven thickness appear on the pr ojected image, these symptoms m ay be improved by displaying
it in its original image size (NATIVE mode). To display the image in the NATIVE mod e, set ASPECT of the SIG NAL men u to N A -
TIVE.12691
• For signals that are larger than the panel r esolution, only their center par t is displayed in the NATIVE mode. The area exceeding
the panel resolution isn’t displaye
• In the NAT IVE mode, im ages are black-framed when the im age resolution is lower than the panel resolution.
• In the NAT IVE mode, s ome signals may be displayed with a black frame even when they have a higher resolution than the
panel resolution.
Available signal system for SDI (for P HWU-81B only)
480i
SD-SDI
576i
720/50p
720/60p
1080/50i
1080/60i
HD-SDI
1080/24p
1080/50p3G-SDI
1080/60p
The s ignal format supports 1/1.001.
R5905597 PHXX SERIES 20/05/2014
115

Barco PHWU-81B Specifications

General

Matrix size	0.67 \
Matrix type	DMD
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2800:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Projector brightness (economic mode)	5450 ANSI lumens
Focal length range	- mm
Lamp power	350 W
Lamps quantity	2 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	4000 h
Full HD	No
Supported graphics resolutions	1920 x 1200 (WUXGA)
BNC input ports	5
Serial interface type	RS-232
USB 2.0 ports quantity	0
Ethernet LAN data rates	10, 100 Mbit/s
I/O ports	SDI
Noise level	44 dB
Noise level (economic mode)	39 dB
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	Black, White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	910 W
Power consumption (standby)	0.3 W
Power consumption (economy mode)	690 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 90 %

Weight and Dimensions

Depth	660 mm
Width	510 mm
Height	263 mm
Weight	21000 g
Package depth	840 mm
Package width	650 mm
Package height	415 mm
Package weight	26500 g