Barco PHWU-81B User Manual

9. Advanced features
3. Press ENTER key.
The screen is split in two and the left and right screens display the following images:
Left
screen
Image supplied to the last selected input s ource, VGA ( CO MP UTER1), 5BNC (COMP UT ER2), DV I, HDMI or
SDI (for PHW U-81B only)
Right
screen
Image supplied t o t he last selected input source, VIDEO or S-VIDEO
Important
• When y ou pres s the MENU key, the s creen is displaye d in the normal mode.
• Also, when you c hange the input so urce, the screen is displayed in the norm al mod e.
• In the split mode, the picture quality settings of the input source in the normal m ode to be displayed on the left screen are
reflected on the entire screen.
• When no signal is input, a blue screen is displayed.
• When you input an interlace signal to the left s creen, the displayed image may shake up and d own slightly, but t
his is not a
malfunction.
• When you display 60-Hz and 50-Hz video signals at the same time, motion images m ay not be displayed properly. In this case,
set VERT. S YN C. of USER in the SIGNAL m enu to OFF for the left screen.
• You cannot us e the split mode unless a signal is being input.
• Displaying the screen split in two may take some time depending on the signal.
To change the input source of the left or right screen:
• To change the input source of the left screen, press the ◄ key on the remote control. E ach time the the ◄ keyispressed,the
input so urce setting changes in order of VGA (COMPUTE R 1) → 5BNC ( CO MP UTE R 2) → DVI → HDMI → SDI (for PHWU-
81B only) → VGA (COMPUTER 1) ....
• To change the input source of the right screen, p ress the ► key on the remote control. Each time the the ► keyispressed,the
input source setting ch anges in order of VIDEO → S-VIDEO → VIDEO ....
9.3 Picture in Picture (PIP)
for PHXG- 91B onl y
About Picture in Picture
One of the special features of this pr ojector is the picture-in-picture (PIP) m ode. The PIP mode allows you to view the imag es from
different s ources at the same time.
While viewing the image from the VGA (COMP UT ER1), 5BNC (COMPUTER2), DVI, or HDMI input source, you can display the
image from the VIDEO or S-VIDEO input source as a sub image.
A
Image 9-6
A Sub image
To use the PIP mode:
1. Display the INSTALLATION 1 menu in the ADVANCED MENU.
2. Select PIP.
3. Press ENTER key.
Sub image is displayed.
R5905597 PHXX SERIES 20/05/2014
87

Barco PHWU-81B Specifications

General

Matrix size	0.67 \
Matrix type	DMD
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2800:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Projector brightness (economic mode)	5450 ANSI lumens
Focal length range	- mm
Lamp power	350 W
Lamps quantity	2 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	4000 h
Full HD	No
Supported graphics resolutions	1920 x 1200 (WUXGA)
BNC input ports	5
Serial interface type	RS-232
USB 2.0 ports quantity	0
Ethernet LAN data rates	10, 100 Mbit/s
I/O ports	SDI
Noise level	44 dB
Noise level (economic mode)	39 dB
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	Black, White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	910 W
Power consumption (standby)	0.3 W
Power consumption (economy mode)	690 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 90 %

Weight and Dimensions

Depth	660 mm
Width	510 mm
Height	263 mm
Weight	21000 g
Package depth	840 mm
Package width	650 mm
Package height	415 mm
Package weight	26500 g