Barco PHWU-81B User Manual

9. Advanced features
9. ADVANCED FEATURES
9.1 Password function
About the password function
This projector is equipped with the password function that is designed for prevention of wrong oper
ation by children and restriction
on operation by other than specified users. The password function has 3 m odes as follows.
DISPLAY INPUT W hen the projector is turned on, the startup screen (or splash screen) will appear and stay on the screen
until the password is entered. When the password is entered, the s tartup screen will switch to the r egular
operation screen.
MENU ACCES S All the k eys except fo r the PO W ER key on the projector are disabled. (The keys on the remote control
are enabled.) You can use this mode as a meas ure of prevention of wrong operation by children an
d
restriction on operation b y other than specified users.
SPLASH ID
SCREEN
IMAGE CAP TURE and S PLASH SCREEN in the INSTALLATION 2 m enu become unavailable. SPLASH
SCREEN will be set to ON automatically.
9.1.1 Enabling the password function
How to enable
1. Display the FEATURE m enu.
2. Press the ▲ or ▼ key to select PA SSWORD FUNCTION.
3. Press the ◄ or ► key to c hange the m ode among DISPLAY INPUT
, MENU ACCESS an d SPLA SH ID SCRE EN .
When the password has already been set, the mode won’t be changed. In such c ases, pres s the ENTER key to cancel the
password function and try again.
4. Press the ENTER key.
The s creen for setting the password function will appear.
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN
FEATURE SIGNAL NETWORK INFO
DISPLAY INPUT
LOCK
UNLOCK
ENTER
ENTER
Image 9-1
5. Press the ENTER key.
The screen for entering a password will appear.
PASSWORD
CONFIRM
1
3
24
O K : ENTER
CANCEL : MENU
Image 9-2
6. Enter a 4 - 8 digit password us ing the ▲, ►, ▼ and ◄ keys.
(▲=1, ►=2, ▼=3, ◄=4)
7. Press the ENTER key.
To cancel the procedure, press the MENU key.
8. Enter the password again for confirmation using the same steps.
9. Press the ENTER key.
→ If the entered passwords don’t match, an error mess age will appear.
→ To cancel the procedure, press the MENU key.
R5905597 PHXX SERIES 20/05/2014
85

Barco PHWU-81B Specifications

General

Matrix size	0.67 \
Matrix type	DMD
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2800:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Projector brightness (economic mode)	5450 ANSI lumens
Focal length range	- mm
Lamp power	350 W
Lamps quantity	2 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	4000 h
Full HD	No
Supported graphics resolutions	1920 x 1200 (WUXGA)
BNC input ports	5
Serial interface type	RS-232
USB 2.0 ports quantity	0
Ethernet LAN data rates	10, 100 Mbit/s
I/O ports	SDI
Noise level	44 dB
Noise level (economic mode)	39 dB
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	Black, White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	910 W
Power consumption (standby)	0.3 W
Power consumption (economy mode)	690 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 90 %

Weight and Dimensions

Depth	660 mm
Width	510 mm
Height	263 mm
Weight	21000 g
Package depth	840 mm
Package width	650 mm
Package height	415 mm
Package weight	26500 g