Connecting to a Wired LAN
0W20-02W
Connect the machine to a computer via a router. Use a LAN cable to connect the machine to the router.
1
Connect a LAN cable.
● Connect the machine to a router by using a LAN cable.
● Push the connector in until it clicks into place.
2
Wait approximately 2 minutes.
● While you wait, the IP address is set automatically.
● You can set the IP address manually. Setting IP Addresses(P. 153)
LINKS
Connecting to a Network(P. 132)
Network
135
To Next Page
Loading...
Need help?
General