Off
On
<Printer Settings>
<PCL>
<Custom Paper>
Select <Off> or
<On>
Unit of Measure
Select the unit of measurement to use to set a custom paper size.
Millimeters
Inches
<Printer Settings>
<PCL>
<Unit of Measure>
Select <Millimeters>
or <Inches>
X dimension
Specify the horizontal dimension (short edge) of the custom paper.
77 to 216 (mm)
<Printer Settings>
<PCL>
<X dimension>
Specify the dimension
Y dimension
Specify the vertical dimension (long edge) of the custom paper.
127 to 356 (mm)
<Printer Settings>
<PCL>
<Y dimension>
Specify the dimension
Append CR to LF
Select whether to append a carriage return (CR) when the machine receives a line feed code (LF). If <Yes> is
selected, the print position moves to the beginning of the next line when the machine receives an LF code. If
<No> is selected, the print position moves to the next line, just under the received LF code.
Setting Menu List
324
To Next Page
Loading...
Need help?
General