Common Settings
0W20-05A
All the settings for paper feed method are listed with short descriptions.Default
settings are marked with a dagger ( ).
Asterisks (
*
)
● Settings marked with an asterisk (
*
) are only available when the optional paper feeder (drawer 2) is attached.
Switch Paper Feed Method
Specify this setting when you print a document on paper with logos. To print on paper with logos, you need to change
how the paper loaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing.
However, if you change the setting to <Print Side Priority>, you can use just the same way of paper loading (which side
up or down) both for 1- and 2-sided printing (the logo side face up when using the paper drawer, or the logo side face
down when using the multi-purpose tray). For more information, see
Loading Preprinted Paper(P. 46) .
Multi-Purpose Tray
Speed Priority
Print Side Priority
Drawer 1
Speed Priority
Print Side Priority
Drawer 2
*
Speed Priority
Print Side Priority
<Common Settings> <Switch Paper Feed Method> Select the paper
source
Select <Speed Priority> or <Print Side Priority>
Paper Sources
Select the paper source that you want to change the setting for.
Setting Menu List
311
To Next Page
Loading...
Need help?
General