Canon LBP251dw - Logging on to the Machine

Logging on to the Machine
0W20-00L
If Department ID Management is enabled or System Manager IDs are enabled, you must log on before using the
machine. When the logon screen appears, use the procedure below to enter the department ID and PIN.
1
Enter an ID.
1
Use / to select <Department ID> or <System Manager ID>, and press .
2
Enter an ID using the numeric keys, and press .
● If no PIN is registered, proceed to step 3.
2
Enter the PIN.
1
Select <PIN>, and press .
2
Enter an ID using the numeric keys, and press .
3
Press .
● The logon screen will be changed to the main screen.
● After you nish using the machine, press
again to display the logon screen.
LINKS
Setting the Department ID Management(P. 209)
Setting the System Manager ID(P. 207)
Basic Operations
34