Uninstalling e-Manual
0W20-07W
You can remove the e-Manual from the computer to restore the computer to the same state it was in before the e-
Manual was installed.
1
Insert the User Software and Manuals DVD-ROM into the drive on the computer.
● Select a language and click [OK] if you are prompted to do so.
2
Click [Start Software Programs].
● If the above screen is not displayed, see Displaying the [Software Programs/Manuals Setup]
Screen(P. 476) .
● lf [AutoPlay] is displayed, click [Run MInst.exe].
3
Click [Start] for [Manual Uninstaller].
Appendix
462
To Next Page
Loading...
