Enable Direct Connection
*
Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an
environment without an access point or wireless LAN router.
Off
On
<Network Settings> <Enable Direct Connection> Select <Off> or <On>
Restart the machine
Setting <Enable Direct Connection> to <On> prevents use of a wired LAN or any wireless LAN other than Direct
Connection.
TCP/IP Settings
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
IPv4 Settings
Specify settings for using the machine in an IPv4 network.
IP Address Settings
Conī “gure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP
network. Setting IPv4 Address(P. 154)
Auto Acquire
Select Protocol
Off
DHCP
Auto IP
Off
On
Manually Acquire
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway Address: 0.0.0.0
Check Settings
Auto Acquire
IP Address
Subnet Mask
Gateway Address
Setting Menu List
292
To Next Page
Loading...
