Adjustment/Maintenance
0W20-05F
All the settings about adjustment and maintenance are listed with short descriptions.
Default settings are marked with a dagger ( ).
Asterisks (
*
)
Settings marked with an asterisk (
*
) are only available when the optional paper feeder (drawer 2) is attached.
Display Timing for Cartridge Preparation Notiî ´cation (P. 332)
Printer Density(P. 332)
Toner Save(P. 333)
Adjust Print Position(P. 333)
Special Processing(P. 334)
Clean Fixing Assembly(P. 336)
Display Timing for Cartridge Preparation Notiî ´cation
Set the display timing for the message notifying you that the amount remaining in the toner cartridge is low.
Auto
Custom
1 to 20 to 99 (%)
<Adjustment/Maintenance>
<Display Timing for Cartridge Preparation
Notiî ´cation> <Custom> Enter toner level
Printer Density
Adjust the toner density to be used for printing.
Adjusting Print Density(P. 405)
Nine Levels
<Adjustment/Maintenance>
<Printer Density>
Use
/
to adjust the
toner density
Setting Menu List
332
To Next Page
Loading...
Need help?
General