Loading Envelopes
0W20-00W
Make sure to atten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes
and which side is face up. Note that envelopes cannot be loaded in the paper drawer.
Before Loading Envelopes(P. 44)
Loading Envelopes in the Multi-Purpose Tray(P. 45)
● This section describes how to load envelopes in the orientation you want, as well as procedures that you
need to complete before loading envelopes. For a description of the general procedure for loading
envelopes in the multi-purpose tray, see Loading Paper in the Multi-Purpose Tray(P. 41) .
Before Loading Envelopes
Follow the procedure below to prepare the envelopes before loading.
1
Close the ap of each envelope.
2
Flatten them to release any remaining air, and make sure that the edges are pressed
tightly.
3
Loosen any stiff corners of the envelopes and atten any curls.
Basic Operations
44
To Next Page
Loading...
Need help?
General