Off
On
<Network Settings> <Dedicated Port Settings> Select <Off> or
<On> Restart the machine
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a
Wait Time for Connecting to a Network(P. 180)
0 to 300 (sec.)
Ethernet Driver Settings
Select the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/
full-duplex). You can also view the MAC address for wired LAN.
MAC Address
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MAC Address for Wired LAN(P. 162)
Auto Detect
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Conî ´guring Ethernet Settings(P. 177)
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type
10BASE-T
100BASE-TX
1000BASE-T
On
IEEE 802.1X Settings
*
Enable or disable IEEE 802.1X authentication.
Conî ´guring IEEE 802.1X Authentication(P. 248)
Off
On
Setting Menu List
299
To Next Page
Loading...
Need help?
General