Fixing Unit
0W20-066
Dirt may adhere to the xing units inside the machine and cause black streaks to appear on printouts. To clean the
xing unit, perform the following procedure. Note that you cannot clean the xing unit when the machine has
documents waiting to be printed. To clean the xing unit, you need plain A4 or Letter size paper. Set the paper in the
paper drawer or multi-purpose tray (
Loading Paper in the Paper Drawer(P. 37) Loading Paper in the Multi-
Purpose Tray(P. 41) ) before performing the following procedure.
● Cleaning consumes the toner cartridge. Make sure that there is sucient toner cartridge remaining
beforehand. Checking the Amount Remaining in the Toner Cartridge(P. 397)
1
Press .
2
Use
/
to select <Adjustment/Maintenance>, and press
.
3
Select <Clean Fixing Assembly>, and press .
4
Check that the size and type of paper displayed on the screen is loaded in the
machine, and press .
5
Press .
➠ The cleaning sheet is printed out.
6
Load the printed cleaning sheet in the multi-purpose tray, with the printed side face
down.
Maintenance
394
To Next Page
Loading...
Need help?
General