Cisco CVR100W Administration Guide

Configuring VPN
Configuring VPN Clients
Cisco CVR100W Wireless-N VPN Router Administration Guide 99
6
3. To enable access using Cisco QuickVPN on this router, you must enable remote
management. See Configuring Remote Management.
Site-to-Site VPN
The CVR100W supports site-to-site VPN for a single gateway-to-gateway VPN
tunnel. For example, you can configure the CVR100W at a branch site to connect to
the router at the corporate site, so that the branch site can securely access the
corporate network. See Configuring Basic VPN Setup and Configuring
Advanced VPN Setup for more information on configuring site-to-site VPN.
Configuring VPN Clients
This section describes how to create and manage the QuickVPN users.
Creating and Managing QuickVPN Users
To create QuickVPN users:
STEP 1 Choose VPN > VPN Clients.
STEP 2 In the VPN Client Settings table, click Add Row.
STEP 3 Enter the following information:
STEP 4 Click Save.
STEP 5 To edit the settings of a QuickVPN user, check the relative box and click Edit.
When you are done making changes, click Save.
Enable Check to enable the user.
Username
Enter the username of the QuickVPN user
(4 to 32 characters). The usernameof the VPN client
cannot be same as the name of an existing VPN policy.
Password Enter the password (4 to 32 characters).
Allow User to Change
Password
Check to allow the user to change its password.

Cisco CVR100W Specifications

General

Brand	Cisco
Model	CVR100W
Category	Network Router
Language	English