Cisco CVR100W Administration Guide

Configuring Network
Configuring WAN Settings
Cisco CVR100W Wireless-N VPN Router Administration Guide 41
3
STEP 4 (Optional) To configure other optional settings, see Configuring Optional
Settings.
STEP 5 Click Save.
Configuring Optional Settings
To configure optional WAN settings:
STEP 1 Choose Networking > WAN > Internet Setup.
STEP 2 In the Optional Settings area, enter the following information:
Internet IP Address Enter the IP address of the WAN port.
Subnet Mask Enter subnet mask of the WAN port.
Default Gateway Enter the IP address of the default gateway.
Static DNS 1 Enter the IP address of the primary DNS server.
Static DNS 2 Enter the IP address of the secondary DNS server.
Host Name Enter the host name of the CVR100W.
Domain Name Enter the domain name for your network.
MTU The Maximum Transmit Unit (MTU) is the size of the
largest packet that can be sent over the network.
The standard MTU value for Ethernet networks is
usually 1500 bytes. For PPPoE connections, the value
is 1492 bytes.
Unless a change is required by your ISP, Cisco
recommends that you choose Auto. The default MTU
size is 1500 bytes.
If your ISP requires a custom MTU setting, choose
Manual and enter the MTU size.
Size Enter the MTU size.

Cisco CVR100W Specifications

General

Brand	Cisco
Model	CVR100W
Category	Network Router
Language	English