Cisco CVR100W Administration Guide

Configuring Network
Configuring IP Mode
Cisco CVR100W Wireless-N VPN Router Administration Guide 53
3
STEP 5 To test the DDNS configuration, click Test Configuration.
STEP 6 Click Save.
Configuring IP Mode
Wide area network configuration properties are configurable for both IPv4 and
IPv6 networks. You can enter information about your Internet connection type and
other parameters.
To select an IP mode:
STEP 1 Choose Networking > IP Mode.
STEP 2 From the IP Mode drop-down menu, choose one of the following options:
Password Enter the password of the DDNS account.
Host Name (3322.org) Enter the host name of the DDNS server.
Internet IP Address (3322.org) Internet IP address of the CVR100W.
Status (3322.org) Displays the status if the DDNS update has
completed successfully or if the account update
information sent to the DDNS server failed.
Domain Name (oray.org) Displays the domain name of the account.
User Level (oray.org) Displays the user level of the account.
Status (oray.org) Displays the status if the DDNS update has
completed successfully or if the account update
information sent to the DDNS server failed.
LAN:IPv4, WAN:IPv4 Choose this option to use IPv4 in the LAN and WAN
ports.
LAN:IPv6, WAN:IPv4 Choose this option to use IPv6 in the LAN ports and
IPv4 in the WAN ports.
LAN:IPv6, WAN:IPv6 Choose this option to use IPv6 in the LAN and WAN
ports.

Cisco CVR100W Specifications

General

Brand	Cisco
Model	CVR100W
Category	Network Router
Language	English