Cisco CVR100W Administration Guide

Introduction
Installing the CVR100W
Cisco CVR100W Wireless-N VPN Router Administration Guide 13
1
Default Settings
These are the default settings used when configuring your CVR100W for the first
time.
NOTE Press and hold the RESET button for more than five seconds to reboot the unit and
restore the factory defaults. Changes that you have previously made to the
CVR100W settings are lost.
Installing the CVR100W
You can place your CVR100W on a desktop or mount it on a wall.
Placement Tips
• Ambient Temperature—To prevent the CVR100W from overheating, do not
operate it in an area that exceeds an ambient temperature of 104°F (40°C).
• Air Flow—Be sure that there is adequate air flow around the CVR100W.
• Mechanical Loading—Be sure that the CVR100W is level and stable to
avoid any hazardous conditions.
Place the CVR100W horizontally on a flat surface so that it sits on its four rubber
feet.
Parameter Default Value
Username cisco
Password cisco
LAN IP 192.168.1.1
DHCP Range 192.168.1.100 to 192.168.1.149

Cisco CVR100W Specifications

General

Brand	Cisco
Model	CVR100W
Category	Network Router
Language	English