EasyManuals Logo
Home>Cisco>Network Router>CVR100W

Cisco CVR100W Administration Guide

Cisco CVR100W
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Introduction
Changing the Default Administrative Password
Cisco CVR100W Wireless-N VPN Router Administration Guide 16
1
NOTE The CVR100W automatically changes its IP address to 10.10.10.1 when its
default IP address conflicts with another device in your network.
STEP 3 When the login page appears, choose the language that you prefer to use in the
utility, and then enter the username and password.
The default username is cisco. The default password is cisco. Both username and
password are case sensitive.
STEP 4 Click Log In. The Setup Wizard will now launch.
STEP 5 Follow the on-screen prompts to complete the initial configuration. See Running
the Setup Wizard for more information on completing the Setup Wizard
configuration.
For security reasons, you must change the password from its default setting at
your first login. Please write this password down for future reference. A blank
password is not recommended.
Passwords should not contain dictionary words from any language or be the
default password. They should contain a mixture of uppercase and lowercase
letters, numbers, and symbols. Passwords must be at least 8 but no more than 64
characters in length.
After the Setup Wizard is complete, the Connection Status page appears. See
Using the Connection Status Page for more information.
Changing the Default Administrative Password
The administrative password protects your CVR100W from unauthorized access.
For security reasons, you must change the password from its default setting at
your first login.
You can change the default administrative password as instructed by the Setup
Wizard (see Running the Setup Wizard) or by following the instructions in the
Configuring Administrator Account Settings section. If you exit the Setup
Wizard without saving your settings at your first login by clicking Exit, the Change
Password window opens.
By default, the password strength enforcement is enabled on the CVR100W. The
Change Password window displays the minimum password complexity
requirements as follows:

Table of Contents

Other manuals for Cisco CVR100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco CVR100W and is the answer not in the manual?

Cisco CVR100W Specifications

General IconGeneral
BrandCisco
ModelCVR100W
CategoryNetwork Router
LanguageEnglish

Related product manuals