Cisco CVR100W Administration Guide

Configuring Wireless Network
Configuring Basic Wireless Settings
Cisco CVR100W Wireless-N VPN Router Administration Guide 68
4
Configuring Basic Wireless Settings
The Basic Settings page allows you to configure basic wireless settings.
Configuring Wireless Radio Settings
To configure the wireless radio settings:
STEP 1 Choose Wireless > Basic Settings.
STEP 2 In the Radio field, check Enable to turn the wireless radio on.
This field enables the wireless radio itself. By default there is only one wireless
network enabled, cisco-xxxx.
STEP 3 In the Wi-Fi Power field, select the Wi-Fi power on your network.
STEP 4 In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
SSID Isolation Disabled Disabled Disabled Enabled
WMM Enabled Enabled Enabled Enabled
WPS
Hardware
Button
Enabled Disabled Disabled Disabled
SSID Name cisco-xxxx cisco-SSID2 cisco-SSID3 cisco-guest
B/G/N-Mixed Choose this option if you have Wireless-N, Wireless-B, and
Wireless-G devices in your network. This is the default setting
(recommended).
B-Only Choose this option if you have only Wireless-B devices in your
network.
G-Only Choose this option if you have only Wireless-G devices in
your network.
N-Only Choose this option if you have only Wireless-N devices in your
network.

Cisco CVR100W Specifications

General

Brand	Cisco
Model	CVR100W
Category	Network Router
Language	English