Cisco CVR100W Administration Guide

Introduction
Using the Connection Status Page
Cisco CVR100W Wireless-N VPN Router Administration Guide 18
1
Using the Connection Status Page
The Connection Status page displays the current WAN, LAN, and WLAN status of
the CVR100W.
You can perform the following actions:
• To refresh the data on the screen, click Refresh.
• To log out the utility, click Log out.
• To launch the Setup Wizard, click Setup Wizard.
Field Description
WAN
Status Shows whether the WAN port obtains an IP address
successfully or not. If the WAN port is connected to the
Internet, the network addressing mode that you use to
connect to the Internet will be displayed.
IP IP address of the WAN port that is accessible from the
Internet.
Mask Subnet mask for the WAN port.
Gateway Default gateway for the WAN port.
DNS IP addresses for the primary DNS server and the
secondary DNS server.
LAN
Host Name of the LAN host that is connected to the
CVR100W.
IP IP address of the connected LAN host.
MAC MAC address of the connected LAN host.
WLAN
Wi-Fi Power Shows whether the Wi-Fi signal strength is 100%,
50%, or off.

Cisco CVR100W Specifications

General

Brand	Cisco
Model	CVR100W
Category	Network Router
Language	English